Let's face it, building from scratch on a computer without the knowledge of how to go about it in principle impossible.It is really fun building and destroying a computer, if you are able to understand how to do it.I would shortly explained in this article, the main components of a computer and go as they are connected.
PC components: motherboard, RAM chips, AGP or PCI video card, CPU Processer unit, power supply, DVD-ROMs and Hardrive.
Okay, so canjust lay down the procedure.
First, you must attach the motherboard with the motherboard plate. This can be by screwing it be done in accordance with the holes or the use of plastic stoppers.
If the motherboard is plugged in, you will need is the CPU processor unit into the socket, with pins inserted carefully slide into their holes.There usually a little lever that you use to do the CPU in place clip, making this carefully.
The RAM chips are located next tobe placed in their respective sockets. Simply line them with their caves and snaps it.
Next is the graphics might be card.Your AGP graphics card (requires Accelerated Graphics Port) or PCI only so make sure to know. The AGP port is usually a short gray connector on the long, white PCI connectors, so that plug in too.
Now you can see the motherboard mounting plate on the PC. Next, you can add the power supply. Make sure not to go live connections, ifYou do this! Put simply named the power supply in the correct position and screw in.
There are several compounds which can from the power supply, then explain car-sharing also yellow, black and red wires with 5 compounds are used as standard I / O power connectors.These to the DVD-ROMs and hard drives are connected to them also get a long power.There plug from the power supply, which is probably the driving force, after which you plug to yourMotherboard.
The next type of cable you need is the 40-pin IDE cable that connects your CD-ROMs and hard drives on the primary and secondary IDE connectors on the motherboard.You each other will have to decide what where to go.
Another important group of compounds is the front panel connectors.You must make sure that you place it right on the motherboard, as they illuminate the corresponding LED lights for the reset button, hard drive and power of these false and button.DoYour PC does not boot at all.
Once all the internal connections, it was time for the external connections.Simply Connect the monitor to the graphics adapter output, keyboard and mouse to their ports, and all other hardware devices, printers, and generally to have done their respective serial and parallel ports. If everything done correctly, you should have a working computer.
So basically these are the main outlines you need to understand in order to build a computer. tis preserved quite well in the hands of PC-building manuals on the Internet.
If you want a video tutorial on how to build and repair a computer, please visit the website below.
Atom Feed (xml)
ไม่มีความคิดเห็น:
แสดงความคิดเห็น